User Manual

AFG ASIA ENGINEERING CO.LTD.
65/12 M.10 T.Tonpao A.Sankumpang
Chiangmai, Thailand 50130
Tel: [phone]
Fax: [phone]
Page 9
PR500
User manual
Released
Ref. - (PR500 readers) Rev. 1_01 2008-03-13
When user finishes typing in the data, point the reader to an ISO18000/6B tag ,press and hold
the “Trigger” button to write the data into the tag until the display shows “PASS”. When it
finishes writing the display will show “PASSED” and the buzzer will beep.
Picture 3.3.3 writing success
If user wants to write data in ASCII mode, just press the “DISPLAY” button.
Picture 3.3.4 the position of the “DISPLAY” button
Once user presses the “DISPLAY” button, the operation will change to sequence below:
“ISO-6B READ ID(H)” -> “ISO-6B READ DATA(H)” -> “ISO-6B READ DATA(A)”
Or
“ISO-6B WRITE DATA(H)” -> “ISO-6B WRITE DATA(A)”
When user is in “ISO-6B WRITE DATA(A)” mode, the PR500 RFID reader will allow typing in
ASCII Characters (0 – 9, A – Z).