User's Manual

AFG ASIA ENGINEERING CO.LTD.
65/12 M.10 T.Tonpao A.Sankumpang
Chiangmai, Thailand 50130
Tel: [phone]
Fax: [phone]
Page 5
PR100
User manual
Released
Ref. - (PR100 readers) Rev. 1_01 2008-03-13
***For saving power, the reader will turn OFF itself after 10 minutes if no pressed keys or no
commands sent via virtual RS232 port. After the reader turn ON, it will go to the “ISO-6B READ
ID(H)” mode
3.2 Reading IDs
The PR100 RFID reader supports 2 standard types of the RFID transponders/tags,
ISO18000/6B and ISO18000/6C (EPC Class1 Gen2). User can change reading tag type by
pressing the “TAG TYPE” button.
Picture 3.2.1 the position of the “TAG TYPE” button
Once, user press on the “TAG TYPE” button, the reading mode will change by the sequence
below.
ISO-6B READ ID(H) -> EPC-G2 READ ID(H)
Note: *(H) means the reader will show IDs in Heximal number (0 – F)
The counter number will increase according to the number of read tags.
Note: the maximum tag number that the reader can count is 50 unique tags.
If user wants to clear the tag counter and the data on the display, just press the “CLEAR”
button.