User's Manual

AFG ASIA ENGINEERING CO.LTD.
65/12 M.10 T.Tonpao A.Sankumpang
Chiangmai, Thailand 50130
Tel: [phone]
Fax: [phone]
Page 6
PR100
User manual
Released
Ref. - (PR100 readers) Rev. 1_01 2008-03-13
Picture 3.2.3 the position of the “CLEAR” button
When the PR100 RFID Reader reads tag’s ID, the reader will store the information of the tag
into the flash memory and user can download the information by using the program “PR100
Download Software version1.0.0.0” (this document will explain it in the next chapter). The
contents of the information are as below:
Name Description
Record number The address in flash memory that the tag was
stored.
Date Date when the tag was read.
Time Time when the tag was read.
Tag type Type of the tag(ISO18000/6B or
ISO18000/6C)
Action The action mode(READ or WRITE or FIDE)
Display The read field of data(ID, DATA, TID,
RESERV)
ID ID of the tag
Start address If user is in “READ DATA” or “WRITE DATA”
mode, this field will identify which address of
the tag is the start address for reading/writing.
Data length If user is in “READ DATA” or “WRITE DATA
mode, this field will identify how long of the