User's Manual

Table Of Contents

AFG ASIA ENGINEERING CO.LTD.

65/12 M.10 T.Tonpao A.Sankumpang

Chiangmai, Thailand 50130

Tel: +66 53 390 909

Fax: +66 53 390 910

Page 7

PR100

User manual

Released

Ref. - (PR100 readers) Rev. 1_01 2008-03-13

data that user read/write from the start

address to the end of data.

Note: the maximum is 32bytes

Data If user is in “READ DATA” or “WRITE DATA

mode, this field will identify the data in the tag.

3.3 Writing data/ID

The PR100 RFID allows user to write data/ID into RFID tags. However, user needs to know

first which RFID tag type that they are using (ISO18000/6B or ISO18000/6C).

For writing data into tags ISO18000/6B type, user has to go to “ISO-6B WRITE DATA(H)” or

“ISO-6B WRITE DATA(A)*” by pressing the “TAG TYPE” button to select “ISO-6B” type and

then press the “OPERATION” button.

Note: *(A) means the reader will show data in ASCII characters (0-9, A – Z).

Picture 3.3.1 the position of the “OPERATION” button

Once user presses the “OPERATION” button, the operation will change to sequence below:

“ISO-6B READ ID(H)” -> “ISO-6B WRITE DATA(H)” -> “ISO-6B READ DATA(H)”