User Manual

12
7.2.7 Write ISO tag tab
This tab is use for command unit to write data into ISO tag.
7.2.7.1 Set data length and start address
First of all you need to set data length and start address to match EPC data format.
- input value into Start data Address box
- input value into Data length box
- click on Set button
You can the set value to default value by
- clicking on Set default for writing ISO
tag button.
- You need to confirm setting because
changing these value will erase all data
in the unit’s memory.
You can save log file to keep writing
details for further use.
- click on Save log file box
- click on File path button and browse
save location
7.2.7.2 Write memory data
ASCII data : you can write ASCII format
data into tag according to Data Length
and Start Address setting. To do so
- input data into a box
- click on Write button
HEX Data : you can write HEX format
data into tag according to Data Length
and Start Address setting. To do so
- input data into a box
- click on Write button
Set data address and Data length
need your confirmation because
these operations will erase all
data in the unit’s memory.
(see left picture)