User's Manual

19
Set Bank (11)
Description: Defines reading bank that the reader is going to read.
Type: RFID protocol configuration command with Parameter.
Transmits from PC to PR110 UHF RFID READER:
Command Number (2
chars)
Parameter (2 char) Carriage return,
<CR>(1char)
11 04 <CR>
Where:
“10” is the command number.
“04” is reading bank.
Parameter Case 1: if the reader was set Tag Type to ISO18000-6B.
Parameter (2 chars)
Reading bank (2 chars)
00, 01, 02, 03 – Read block data from the specific address.
04 – Read 8 bytes UID (unique ID).