User's Manual
21
Set Start Address (12)
Description: Defines the start address where the reader will read out from the tag
memory when the reader was set Read Bank to:
• Read block data from the specific address
• Read Reserve bank at the specific address
• Read TID bank at the specific address
• Read User Memory bank at the specific address
• Read User Memory bank at the specific address
Type: RFID protocol configuration command with Parameter.
Transmits from PC to PR110 UHF RFID READER:
Command Number (2
chars)
Parameter (2 char) Carriage return,
<CR>(1char)
12 00 <CR>
Where:
“12” is the command number.
“00” is the start address.
Parameter:
Parameter (2 chars)
Start address (2 chars)
00 to FF