User's Manual

23
Set Data Length (13)
Description: Defines the data length that the reader will read out from the tag memory
where starts at the Start Address (3.9 page 16) when the reader was set Read Bank to:
• Read block data from the specific address
• Read Reserve bank at the specific address
• Read TID bank at the specific address
• Read User Memory bank at the specific address
• Read User Memory bank at the specific address
Type: RFID protocol configuration command with Parameter.
Transmits from PC to PR110 UHF RFID READER:
Command Number (2
chars)
Parameter (2 char) Carriage return,
<CR>(1char)
13 08 <CR>
Where:
“13” is the command number.
“08” is the data length.
Parameter:
Parameter (2 chars)
Data length (2 chars)
00 to FF