User's Manual

28
Get Start Address (22)
Description: Get the configuration of the start address where the reader will read out
from the tag memory when the reader was set Read Bank to:
• Read block data from the specific address
• Read Reserve bank at the specific address
• Read TID bank at the specific address
• Read User Memory bank at the specific address
• Read User Memory bank at the specific address
Type: RFID protocol configuration command with Parameter.
Transmits from PC to PR110 UHF RFID READER:
Command Number (2
chars)
Parameter (0 char) Carriage return,
<CR>(1char)
22 - <CR>
Where:
“22” is the command number.
Returns from PR110 UHF RFID READER:
Command Number (2
chars)
Parameter (2 chars)
Carriage return,
<CR>(1char)
22 00 <CR>
Where:
“22” is the echo of the command number.
“00” is the start address.