User's Manual

33
Start Auto-Reading (31)
Description: Starts reading RFID tags and continuously sends data read from tags to the
PC. After sending this command, the reader status will be “Starting RF Power” and then
“Reading” (3.6, page 10).
Type: Reader operation command.
Transmits from PC to PR110 UHF RFID READER:
Command Number (2
chars)
Parameter (0 char) Carriage return,
<CR>(1char)
31
-
<CR>
Where:
“31” is the command number.
Returns from PR110 UHF RFID READER:
Command Number (2
chars)
Parameter (0 chars) Carriage return,
<CR>(1char)
31 - <CR>
Where:
“31” is the echo of the command number.
After: When the reader can read data from RFID tags, the reader will send
automatically data to the PC.