User's Manual

38
Note3: Write Data Mode
When the reader is set Reading Bank (3.8, page 14) to any others from “Read
Multi EPC number with anti-collision process”, the reader will be in “Writing Data
Mode”. In this mode the reader will write the data into the bank that was set in
Reading Bank (3.8, page 14) and start at the address that was set in Start Address
(3.9, page 16).
Returns from PR110 UHF RFID READER:
Command Number (2
chars)
Parameter (0 chars) Carriage return,
<CR>(1char)
40 01 <CR>
Where:
“40” is the command number.
“01” – “Success”
Example1: Write ID into the EPC C1 Gen2 tag.
First, PC sent “30<CR>” to stop running operation.
Then, PC sent “1001<CR>” to set the tag type to ISO18000-6C (EPC C1 Gen2).