User's Manual

39
Then, PC sent “1104<CR>” to set the reading bank to “Read Multi EPC number with anti-
collision process”
The PC sent “401122334455667788<CR>” to write the EPC number into the tag.
The reader succeeded to write the ID to the tag and returned “4001<CR>”
The PC sent “32<CR>” to read and verify the data.
The reader could get the EPC number returned from the tag “1122334455667788<CR>”.
Example2: Write Data into the EPC C1 Gen2 tag.
First, PC sent “30<CR>” to stop running operation.
The PC sent “1001<CR>” to set the tag type to ISO18000-6C (EPC C1 Gen2).
The PC sent “1103<CR>” to set the reading bank to “Read User Memory bank at the
specific address”
The PC sent “1200<CR>” to set the start address to 0x00.
The PC sent “1308<CR>” to set the start address to 0x08.