User's Manual

40
The PC sent “408877665544332211<CR>” to write the data into the tag.
The reader succeeded to write the data to the tag and returned “4001<CR>”
The PC sent “32<CR>” to read and verify the data.
The reader could get the EPC number returned from the tag “8877665544332211<CR>”.
Lock (50)
Description: Permanently Locks a tag at the specific bank or the specific address. After
sending this command, the reader status will be “Starting RF Power” and then “Locking”
(3.6, page 10).
Type: Reader operation command.
Transmits from PC to PR110 UHF RFID READER:
Command Number (2
chars)
Parameter (2 chars) Carriage return,
<CR>(1char)
50 01 <CR>
Where:
“50” is the command number.
“01” is the bank or the address will be locked.
Parameter case 1: the tag type is ISO18000-6B.
Parameter (2 chars)
Data length (2 chars)
00 to FF
Where:
“00” to “FF” is the address you want to lock.