User's Manual

Advanced ID Asia Engineering Co., Ltd Page | 31
6.4.4 Read/Write data to a tag form Tag functions tab
In the ‘Tag Functions’ tab, there are functions to read and write a single tag data. User is able to read or write data
in each bank of the RFID tag (Reserved, UII/EPC, TID and User)
To read HEX from a single tag
Click ‘Read Tag’ button, then put a tag in reader range. Read function will be stop after finish reading a tag or you
can click ‘Stop’ button to stop reading.
Picture 6.4.5 Reader try to read a tag.
Read and write
setting
Read mode
Write mode
Read or write status