User's Manual

To write HEX data in EPC bank
Enter heximal data 12 bytes in the HEX in EPC Number text box. Click ‘Write EPC Number’ button then put a tag in
reader range. Write EPC Number function will be stop after finish writing a tag or you can click ‘Stop’ button to
stop writing.
Note: Read and write function is set to HEX mode by default. To read or write in ASCII mode, select ‘ASCII’ radio
button before click Read or Write tag
Read and write functions Setting
1. AccessPassword : Set read/write access password in 4 bytes
2. Bank : Set read/write from Reserved, UII, TID or User bank in RFID tag (Gen2)
3. StartAddress : Set read/write start address
4. Data Length: Set read/write data lengths
1 2 3 4