User's Manual

Advanced ID Asia Engineering Co., Ltd Page | 36
Declaration of Conformity for USA
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Usually this is followed by the following FCC caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment.
For Canada, Operation is subject to the following two conditions:
1) This device may not cause interference and
2) This device must accept any interference, including interference that may cause undesired operation of the
device
If the antenna is detachable the following sentences according to RSS-210 clause 5.5/5.11 need to be included:
“This device has been designed to operate with an antenna having a maximum gain of .. dB. Antenna having a
higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms”.
“To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the
EIRP is not more than required for successful communication”.
For LAN type equipment, the following text needs also to be present in the user manual:
“To prevent radio interference to the licensed service, this device is intended to be operated indoors and away
from windows to provide maximum shielding.
(Equipment (or its transmit antenna) that is installed outdoors is subject to licensing).