Operator`s manual

a d v a n c e d i l l u m i n a t i o n . c o m

P u l s a r 7 1 0 M a n u a l

9. TriggerPins1and2arenowconguredtorecognizeaRS232/485

logic level trigger input signal.

S1 Functions:

POS 1 On: Trigger 1 is fed through to Trigger 3

Off: Trigger 1 and Trigger 3 are stand alone

POS 2 On: Trigger 2 is fed through to Trigger 4

Off: Trigger 2 and Trigger 4 are stand alone

POS3 On: AdditionallteringisprovidedbetweenTrigger1and 

Trigger 2

  Off: Noadditionallteringisprovided

POS 4 On: Trigger 1 is Sourcing Input

Off: Trigger 1 is Sinking Input

J13 Functions:

Pin 2 – Pin 3 Shunted

Trigger 1 and Trigger 2 are stand alone

Note: In this mode S1 POS 3 should be off.

Pin 2 – Pin 1 Shunted

Trigger 1 and Trigger 2 are one differential trigger

Note: In this mode S1 POS 4 should be off.

The factory default settings are as follows:

S1: POS 1 Off J13:

POS 2 Off Pin 2 – Pin 3 Shunted

POS 3 Off

POS 4 On