Service manual

12 Using Your Gateway Solo™ 9100 Multimedia Notebook
Connecting AC Power
Your notebook is powered by one of the longest-lasting batteries available
and was shipped to you charged, ready to use. You might, however, want to
use the AC adapter to provide a constant supply of power while you are
checking out some of the features.
1. Connect the power cord to the AC adapter.
2. Plug the AC adapter into your notebook’s power connector.
3. Plug the power cord into an electrical outlet.
Connecting the AC adapter
Warning!
Do not attempt to
disassemble the AC
adapter. The AC adapter
has no user-replaceable or
user-serviceable parts
inside. The AC adapter has
dangerous voltages that
can cause serious personal
injury or death. Contact
Gateway about returning
defective AC adapters.
Caution!
Replace the power cord if it
becomes damaged. The
replacement cord must be
of the same type and
voltage rating as the
original cord.