User`s guide

Troubleshooting 21
Installing the DVD software
If you need to install the DVD software, first remove any previously
installed DVD software to prevent any possible conflicts, then
follow the instructions under “Uninstalling the DVD software” on
Page 22.
To install the PC Card software:
1. With Windows95 or Windows98 running, insert the PC Card
in the ZV-enabled slot. The Windows Plug and Play process
asks for the device driver.
2. Insert Disk 1 in the diskette drive.
3. At the prompt type
A:
and press
ENTER.
4. Click Start, select Run, and then type
A:\setup.exe
and press
ENTER.
5. Follow any on-screen instructions to complete the installation.
6. Remove the diskette from the diskette drive.