Installation Instructions

117
The technical materials and information contained in this document are strictly confidential and the exclusive property of Advanced Microwave Engineering s.r.l.
These materials and information are intended solely for the purpose designated and may not be used otherwise.
It is not permitted to disclose or reproduce them in whole or in part without express written permission.
23.3 CLEANING COMPONENTS
To clean the display, do not use aggressive products that could damage the surface of the panel and the housing.
To clean the devices found outside the vehicle, in particular the sensors and the HUB, it is advisable not to use direct jets
of pressurised water (e.g., pressure washer). However, avoid aiming the jet directly to the connection area of the cables
and the union between the cover and the housing; in any case keep a safe distance of at least 1 meter from these devices.