User's Guide

Version 1.6
Last updated: 2021-09-01
15
155 Gordon Baker Road Suite 301, Toronto, Ontario M2H3N5
Support contact: [e-mail] | 1-877-873-1942
www.aoms-tech.com
5.2 UNMOUNT THE LUMINODE
After the job is complete, the LumiSense Cable is consumed but the LumiNode can be used again for the
next temperature monitoring job.
1. Unplug the LumiSense Cable from the LumiNode, and immediately twist on the LumiNode cap
to protect the port. LED will stop flashing once unplugged.
2. Release the LumiNode by cutting or unlocking the zip-tie holding the LumiNode in place.
3. You may use this LumiNode immediately for another Job or put it in the original packaging for
safe storage.