User's Manual

Page 27
FUNCTION1
>BACK
FUNCTION1
>S/P
FUNCTION1
>LV
>ID
LV
FUNCTION1
LV
>FUNCTION1
LV
>FUNCTION2
>FUNCTION1
LV
FUNCTION1
>LV
NORMAL>S
S TOGGLE>
S TOG&E>
>EXT
4.2.7 Function Relay #1
PS1 button is the “Enter” or “Change” command.
PS2 button is the “Next” command.
Select “LV” for receiver low voltage external warning output.
Select “ID” for receiver ID output (works simultaneously with all joystick motions and
interlocking momentary contacts).
Select “NORMAL” the output relay becomes momentary contact when START button is
pressed.
Select “TOGGLE” the output relay becomes toggled contact when START button is pressed.
Select “TOGGLE&E” the output relay becomes toggled contact affected by the e-stop
command (output relay opens when e-stop button is pressed).
Select “EXT” the output relay works simultaneously with the receiver mains.
Select “S/P” the output relay closes when the green START button is pressed and opens
only when transmitter power is switched off, not e-stop pressed.