User's Manual

Page 28

>S/P

FUNCTION2

>LV

>BACK

FUNCTION2

>ID

>FUNCTION2

DEC OFF

ACC OFF

>LX DELAY

TOGGLE

TOG&E

>EXT

NORMAL

>FUNCTION2

>LV

FUNCTION2

4.2.8 Function Relay #2

PS1 button is the “Enter” or “Change” command.

PS2 button is the “Next” command.

Select “LV” for receiver low voltage external warning output.

Select “ID” for receiver ID output (works simultaneously with all joystick motions and

interlocking momentary contacts).

Select “NORMAL” the output relay becomes momentary contact when START button is

pressed.

Select “TOGGLE” the output relay becomes toggled contact when START button is pressed.

Select “TOGGLE&E” the output relay becomes toggled contact affected by the e-stop

command (output relay opens when e-stop button is pressed).

Select “EXT” the output relay works simultaneously with the receiver mains.

Select “S/P” the output relay closes when the green START button is pressed and opens

only when transmitter power is switched off, not e-stop pressed.