User's Manual

Flex ECO 4S/4X/8S/8X/12S/12X Instruction Manual
April 2015
Page 23 of 36
1 324 756 8
4.2.3.2 None-Interlocked Pushbutton Pair
Non-interlocked settings allow the pushbutton pair be used at the same time. Non-
interlocked settings are usually applied to crane’s or equipment’s auxiliary functions
such as lights, horn or buzzer. Each dipswitch on the RF/decoder board
corresponds to a pushbutton pair. Only the first 7 dipswitch positions are used
(counting from left to right), the 8
th
dipswitch position (far right) is not used.
Function
Code
Dip
Position
#1
Dip Position
#2~#4 (left button)
&
#5~#7 (right button)
Function Description
A
1 000
Normal (momentary) contact
B
1 001
Toggled (latching) contact
C
1 010
Acceleration (3
rd
speed)
D
1 100
Normal + Start function - For added
safety, you must first press and hold the
START button and then press the
intended pushbutton to activate the
output relay.
E
1 110
Pitch & Catch
F
1 111
Auxiliary Stop
Example #1: Left button (set to function code A) / right button (set to function code B) → 1 000 001
Example #2: Left button (set to function code C) / right button (set to function code D) → 1 010 100