User's Manual

Flex ECO 4S/4X/8S/8X/12S/12X Instruction Manual
April 2015
Page 33 of 36
6.6 System Status Light Indications
6.6.1 Transmitter Status Indications
Type Display Type Indication
1
Constant red
Voltage below 1.9V at initial power on.
Transmitter power and receiver MAIN
relays shuts off.
Voltage below 1.8V during operation.
Transmitter power and receiver MAIN
relays shuts off.
2
1 red blink followed by a
2-second pause
Voltage below 1.85V during operation.
Change batteries suggested.
3
2 red blinks followed by a
2-second pause
Defective or jammed pushbutton detected
at initial power on.
4
No light displayed
When defective pushbutton condition
occurs (2 red blinks, type 3 above), find
out which pushbutton is defective by
pressing all of them one at a time. If the
pushbutton is in good working order when
pressed, the Status LED is off. If the Status
LED maintained 2 red blinks then
the pushbutton is defective.
5
3 red blinks followed by a
2-second pause
EEPROM error.
6
4 red blinks followed by a
2-second pause
Transmitter is unable to lock onto the
assigned channel.
7
Constant green for up to
2 seconds
Transmitter power on with no faults detected.
8
Blinking green Transmission in progress.
9
Blinking orange
Pressing any pushbutton prior to initiating
the START command at power on.