User's Manual

Page 15
>62
>CHANNEL
11>02
CHANNEL
>BACK
^
01
>CHANNEL
^
CHANNEL
^
^
CHANNEL
02
01 01
CHANNEL
CHANNEL
>01
CHANNEL
>01
CHANNEL
CHANNEL
01
CHANNEL
01
>TYPE:
ABCDEF
GH
+START
AC
F
F
>TYPE:
>TIMER
GH
TYPE:
^
00M00SABCDEF
E
C
>TYPE:
E
C
D A
^
D
>BACK
BF
TYPE:
D
E
TYPE:
^
TYPE:
B
BA ABCDEF
GH
H
TYPE:
^
GG
B to F
GHG
TYPE:
H
TYPE:
^
^
H
^
TYPE:TYPE:
GH
4.1.2 Transmitter Channel
SW6 button is the “Enter” or “Change” command.
SW7 button is the “Next” command.
When transmitter channel is changed make sure the receiver channel is also set to the newly
selected channel. Please refer to section 7.3 automatic channel scanning operating procedure
if the receiver is set to “scan all channels” (see section 4.2.4).
4.1.3 Transmitter Type
SW6 button is the “Enter” or “Change” command.
SW7 button is the “Next” command.
Transmitter Type is associated with functions such as tandem operation, random access
operation, multi-receiver operation, etc... Please do not alter the factory settings unless
authorized to do so.