User's Manual

Page 16
TIMER
>00M00S 0
TIMER
^
TIMER
^^
0M00S
000MS0000MS0
^
TIMER
0S000M
>+START
TIMER
0S000M
TIMER
1
^
0M00S 0
TIMER
0
^
S10M
>BACK
TIMER
ON>ON
TIMER
TIMER
00M00S
0.1mW
>RFpower
00M00S
>TIMER
+START
+START
+START
>ON
TIMER
+START
ON
TIMER
>+START
TIMER
ON
>+ANY +START
>TIMER
ON
~
>+ANY
0S
>BACK
TIMER
00M
00M00S
>TIMER
0
+START
TIMER
>00M00S
+START
0.1mW
>RFpower >IR MODE
OFF
RFpower
>0.1mW
RFpower
>0.4mW
RFpower
0.1mW
>BACK
>0.1mW
RFpower
0.1mW
>RFpower
>02mW
>04mW
>08mW
>06mW
>10mW
RFpower
>01mW
4.1.4 Transmitter Inactivity Timer
SW6 button is the “Enter” or “Change” command.
SW7 button is the “Next” command.
Transmitter inactivity timer is for setting transmission cutoff time when the transmitter is not in
operation for a certain period of time. When set to 5 minutes (05M00S), the transmitter will
seize transmission at 5.0 minutes after last transmitter operation.
Select “ON” means the transmission is constantly on (inactivity timer disabled) until the e-stop
button is pressed or when the transmitter power is switched off.
Select “+START” means after 5 minutes of transmitter inactivity you must press the green
START button to continue operation. Select “+ANY” means after 5 minutes of transmitter
inactivity operate the joysticks, buttons or switches to continue operation.
4.1.5 Transmitter Output Power
SW6 button is the “Enter” or “Change” command.
SW7 button is the “Next” command.