User's Manual

Page 18
>TILT
OFF
>SW1FUNC
NORMAL
>OFF
TILT
TILT
>0.5S
>1.0S
TILT
OFF
TILT
>BACK
OFF
>TILT
>OFF
TILT
>IRSfunc
TimeOut OFF
>TILT
IRS off
IRSfunc
TimeOut
>IRS off
TimeOut
IRSfunc
>IRS on
IRSfunc
TimeOut
>BACK
>IRSfunc
TimeOut
IRS off
IRSfunc
TimeOut
>IRS off
4.1.8 Transmitter Infrared START Function
SW6 button is the “Enter” or “Change” command.
SW7 button is the “Next” command.
Select “IRS ON” if infrared START is required after every transmitter timeout (see section 4.1.4).
Select “IRS OFF” if infrared START is not required after every transmitter timeout.
4.1.9 Transmitter Tilt Function
SW6 button is the “Enter” or “Change” command.
SW7 button is the “Next” command.
When TILT function is set to 0.5s (more sensitive) or 1.0s (less sensitive), the receiver mains
are disconnected (opened) when the transmitter is tilted for more than 35~40 degrees. Select
OFF disables the TILT function.