User's Manual

Page 19
>SW1FUNC
NORMAL
>SW2FUNC
NORMAL
>NORMAL
SW1FUNC
SW1FUNC
>TOGGLE
SW1FUNC
>BACK
NORMAL
NORMAL
>SW1FUNC
SW1FUNC
>NORMAL
SW1FUNC
>A->B
>0->A->B
>A->B->AB
>0->A->B->AB
>SW2FUNC
NORMAL
>SW3FUNC
NORMAL
>NORMAL
SW2FUNC
SW2FUNC
>TOGGLE
SW2FUNC
>BACK
NORMAL
NORMAL
>SW2FUNC
SW2FUNC
>NORMAL
SW2FUNC
>A->B
>0->A->B
>A->B->AB
>0->A->B->AB
4.1.10 SW1 Button Function
SW6 button is the “Enter” or “Change” command.
SW7 button is the “Next” command.
Select “NORMAL” the output relay becomes momentary contact.
Select “TOGGLE” the output relay becomes toggled contact.
Important note: If SW1 is equipped with a rocker switch then this SW1 button function and
SW1 output relay function in receiver (see section 4.2.14) must both set to “NORMAL”.
4.1.11 SW2 Button Function
SW6 button is the “Enter” or “Change” command.
SW7 button is the “Next” command.
Select “NORMAL” the output relay becomes momentary contact.
Select “TOGGLE” the output relay becomes toggled contact.
Important note: If SW2 is equipped with a rocker switch then this SW2 button function and
SW2 output relay function in receiver (see section 4.2.15) must both set to “NORMAL”.