User's Manual

Page 20
>SW3FUNC
>A->B
NORMAL
>0->A->B
>TOGGLE
SW3FUNC
NORMAL
>SW3FUNC
>NORMAL>NORMAL
SW3FUNC
NORMAL
NORMAL
>BACK
>0->A->B->AB
>SW4FUNC
SW3FUNCSW3FUNC
>A->B->AB
SW3FUNC
SW4FUNC SW4FUNCSW4FUNC
>0->A->B->AB
>SW5FUNC
SW4FUNC
NORMAL
>BACK
>A->B->AB
NORMAL
NORMAL
>0->A->B
>NORMAL
>SW4FUNC
>NORMAL
NORMAL>TOGGLE
>A->B
>SW4FUNC
SW4FUNC
4.1.12 SW3 Button Function
SW6 button is the “Enter” or “Change” command.
SW7 button is the “Next” command.
Select “NORMAL” the output relay becomes momentary contact.
Select “TOGGLE” the output relay becomes toggled contact.
Important note: If SW3 is equipped with a rocker switch then this SW3 button function and
SW3 output relay function in receiver (see section 4.2.16) must both set to “NORMAL”.
4.1.13 SW4 Button Function
SW6 button is the “Enter” or “Change” command.
SW7 button is the “Next” command.
Select “NORMAL” the output relay becomes momentary contact.
Select “TOGGLE” the output relay becomes toggled contact.
Important note: If SW4 is equipped with a rocker switch then this SW4 button function and
SW4 output relay function in receiver (see section 4.2.18) must both set to “NORMAL”.