User Manual

Verizon Wireless MPE25K RF Repeater
User Manual V0.3
Advanced RF Technologies, Inc. Proprietary Document 31/59
- Band Selection: Simply click on the desired operating bandwidth.
Cellular: Simply select the desired Band. The Main Band (A+A” or B) must be
selected and cannot be switched ON/OFF.
PCS: Simply select the desired Band Width and corresponding Band(s).
- Cellular Band Selection
- PCS Band Selection
- Modem: By default, auto-connection box is checked so that the modem will
connect automatically once sufficient donor signal is present. Minimum RSSI of
-85dBm is recommended.
- SNMP: Type in the assigned site/cascade ID and manager IP address. Default Site
ID and Manager IP address are ADRF and 100.10.10.100, respectively.
- Repeater: Click Install button to automatically setup the repeater. It may take up
to 3 minutes to complete the process…
- Repeater Location: Will display the physical address where the repeater is
installed
- Repeater Installer Info: Will display the installer’s name, phone and e-mail
Address for technical support.