User Manual

Verizon Wireless MPE25K RF Repeater

User Manual V0.3

Advanced RF Technologies, Inc. Proprietary Document 6/59

1. ADRF-25K

1.1 Introduction

Dual bands in one body: ADRF-25K is an over-the-air repeater system that

operates in both the Cellular (824 - 894 MHz) and PCS (1850 – 1990 MHz)

frequencies. It has one input and one output port.

1.1.1 Highlights

• Dual band Repeater

• Covers the 60 MHz PCS band

• Covers the 25MHz Cellular band [A Band or B Band]

• Three switchable SAW filters: You can select any contiguous 5, 10, or 15

MHz bandwidth anywhere within the full 60MHz PCS spectrum.

•. Total out-of-the-box solution: ADRF-25K has all the necessary parts that you

need.The system includes dual band repeater, donor antennas, server antennas,

cables and accessories.

• EVDO Rev. A: ADRF-25K is fully compatible with EVDO Rev. A

• Ec/Io: In order to ensure proper system installation, in addition to the RSSI

indicator on the ADRF-25K’s front panel, you can also read Ec/Io values via

the user interface program.

• Incremental Automatic Shutdown/Resumption Time: ADRF-25K gradually

increases the time span between automatic shutdown and resumption before it

permanently shuts itself down

• AI compatible: ADRF-25K is fully compatible with Applied Innovation’s

monitoring system.

• Versatility and Usability: ADRF-25K gives total control to the user. Most of

the control parameters, e.g., gain, output power, alarm threshold, etc. can be

changed using the user interface so that the user can adjust the system

perfectly to the given RF environment. At the same time, due to its intuitive

user interface, the user won’t even need to read the manual to get a grip of the

system.

• 81 ± 2 dB gain @ PCS, 72 ± 2 dB gain @ Cellular

• 30 dB AGC Range @ 0.5 dB Step

• Sharp out-of-band rejection; 50 dBc @ ±1.5 MHz from the Cellular Sub-band

edge , 50 dBc @ ±1 MHz from the PCS Sub-band edge

• Supports DHCP; No 3

party GUI software required

• Automated installation