User's Manual

Epoch-S02 RF Repeater
User Manual V1.1
Figure 1.5.1 Installation Window of the Epoch-S02 OMS V4.01
12. Select the desired band or bands
Select the desired band or bands by clicking the appropriate buttons.
You can deselect the undesired band or bands by clicking the button
again. You can select among 15 band combinations; A, B, C, D, E, F, AD,
AE, AF, BD, BE, BF, CD, CE and EF. Neither two 5 MHz bands, e.g., DE nor
two 15 MHz bands, e.g., AB, are allowed. The default band is A.
Control Item Action Setting Value
15 MHz Band Band Selection A/B/C
5 MHz Band Band Selection D/E/F
NOTE: Only one 5 MHz band and one 15 MHz band can be chosen
simultaneously (i.e. A and D, B and E, etc.; not A and B, E and F, etc.).
13. Provide SNMP Information
Type in the Site ID and the Manager IP address as given to you by Sprint
PCS. Once both the parameters are typed in, you must click “Set” for it to
be executed.
14. Check the Modem Connection
Check the “Auto Connection” box and then click on “Connect.”
Table 1.5.1 15 MHz and 5 MHz Band Options
15. Click on Install
After the first three steps, click on “Install.” This installation process will
take a few minutes.
Advanced RF Technologies, Inc. Proprietary Document Page 12 of 31