User's Manual
Table Of Contents
- Installation Guide for Epoch-S02
- Environmental requirements
- Warnings and Hazards
- Tools and Recommendations for Installation
- Epoch-S02 Parts List
- Step by Step Instructions for Installation
- User Manual V1.1 using OMS V4.01
- Menu Structure
- Using the Epoch-S02 OMS V4.01
- Alarms
- Default Control Settings
- Maintenance Guide for Epoch-S02 OMS V4.01
- Periodic Inspection Checklist
- Preventive Measures for Optimal Operation
- Troubleshooting
- Epoch-S02 OMS V4.01 Scenarios
- Heartbeat Scenarios
- Warranty and Repair Policy
- General Warranty
- Specific Product Warranty Instructions
- A.1 Minimum Requirements
- A.2 Epoch-S02 OMS V4.01 Installation/Startup
- Appendix B: Specifications
Epoch-S02 RF Repeater
User Manual V1.1
2 User Manual V1.1 using OMS V4.01
2.1 Menu Structure
2.1.1 Main Window Overview
Status
The Status Menu Option
allows you to monitor the
current settings and status
of the Epoch-S02.
Control
The Control Menu Option
enables you to change or
adjust the Epoch-S02’s
parameters and settings.
Install
The Install Menu Option OMS
V4.01 guides you through an
automated installation of the
Epoch–SO2-6.
Com Port Selection
To select the appropriate COM
Port, click the small downward
arrow. A pull-down options
list will appear with a number
of COM Port options.
System Info
For Information about the Epoch-
S02, choose the System Info
option. Information such as Serial
Number and Model Number of the
repeater are included here
.
Figure 2.1.1 Main Status Window of the Epoch-S02 OMS V4.01
Advanced RF Technologies, Inc. Proprietary Document Page 14 of 31