User's Manual
Table Of Contents
- Installation Guide for Epoch-S02
- Environmental requirements
- Warnings and Hazards
- Tools and Recommendations for Installation
- Epoch-S02 Parts List
- Step by Step Instructions for Installation
- User Manual V1.1 using OMS V4.01
- Menu Structure
- Using the Epoch-S02 OMS V4.01
- Alarms
- Default Control Settings
- Maintenance Guide for Epoch-S02 OMS V4.01
- Periodic Inspection Checklist
- Preventive Measures for Optimal Operation
- Troubleshooting
- Epoch-S02 OMS V4.01 Scenarios
- Heartbeat Scenarios
- Warranty and Repair Policy
- General Warranty
- Specific Product Warranty Instructions
- A.1 Minimum Requirements
- A.2 Epoch-S02 OMS V4.01 Installation/Startup
- Appendix B: Specifications
Epoch-S02 RF Repeater
User Manual V1.1
Appendix A: Epoch-S02 OMS V4.01 Installation and Requirements
A.1 Minimum Requirements
Hardware
PC Platform
CPU: 200 MHz
Memory: 32 MByte
Hard Disk: 6 MByte (free space)
Serial Port: 1Port (RS-232)
CD-ROM Drive
Compatible Operating System
Microsoft Windows 98SE, ME, 2000 (preferred), XP
A.2 Epoch-S02 OMS V4.01 Installation/Startup
Installing the Epoch-S02 OMS V4.01
1. Insert the CD into the CD-ROM drive.
2. On the Desktop, click on
My Computer
.
3. In the
My Computer
window, click on your CD-ROM drive, usually
labeled (D:).
4. Double-click the file labeled
setup.exe
.
5. The Installation Wizard will guide you to the conclusion of the OMS
V4.01 installation process.
Initial OMS V4.01 Startup
1. Attach the PC serial (RS-232) port to the repeater’s (DB9 NMS) port
with the cable (straight through) provided.
2. Open the Epoch-S02 OMS V4.01 software
3. In the Status Window, choose your connection to the repeater: COM1,
COM2, COM3, or COM4 (The default setting is COM1). Refer to
section 4.6.1 for additional information.
4. Click
Status
to update the Status Window.
Advanced RF Technologies, Inc. Proprietary Document Page 29 of 31