User's Manual
Table Of Contents
- Installation Guide for Epoch-S02
- Environmental requirements
 - Warnings and Hazards
 - Tools and Recommendations for Installation
 - Epoch-S02 Parts List
 - Step by Step Instructions for Installation
 - User Manual V1.1 using OMS V4.01
 - Menu Structure
 - Using the Epoch-S02 OMS V4.01
 - Alarms
 - Default Control Settings
 - Maintenance Guide for Epoch-S02 OMS V4.01
 - Periodic Inspection Checklist
 - Preventive Measures for Optimal Operation
 - Troubleshooting
 - Epoch-S02 OMS V4.01 Scenarios
 - Heartbeat Scenarios
 - Warranty and Repair Policy
 - General Warranty
 - Specific Product Warranty Instructions
 - A.1 Minimum Requirements
 - A.2 Epoch-S02 OMS V4.01 Installation/Startup
 
 - Appendix B: Specifications
 
    Epoch-S02 RF Repeater 
User Manual V1.1 
Appendix B: Specifications 
B.1 Repeater Specifications 
ELECTRICAL SPECIFICATIONS 
PARAMETERS  SPECIFICATIONS  COMMENTS 
FL  1930 to 1990 MHz   Frequency 
Range 
RL  1850 to 1910 MHz   
Sub Band Filtering  5 MHz, 15 MHz, or 20 MHz  A, D, B, E, F, C, AD, AE, AF, 
DB, DC, BE, BF, EC or FC 
Operating Frequency  Programmable   
Frequency Error  ≤ +/- 0.1 ppm   
System Delay  ≤ 5 usec  Each Direction 
Receiver Dynamic Range  -85 to -45 dBm   
Maximum Adjacent Band 
Signal Level 
-45 dBm  @ Isotropic Antenna 
Repeater Gain  50 to 90 dB   
Maximum FL and RL Output 
Power 
+24 dBm  Composite 
FL AGC Range  40 dB   
RL AGC Range  40 dB   
AGC Step Size  0.5 dB   
Gain Linearity  ≤ +/- 1.0 dB   
Gain Flatness  ≤ 2.5 dB   
Total PA Power Variance  ≤ +/- 0.5 dB   
≤ -45 dBc  @ Fc +/- 885 KHz 
In Band Noise 
≤ -50 dBc  @ Fc +/- 1.98 MHz 
Spurious Emission  < -13 dBm  @ Fc +/- 2.25 MHz 
Rho Factor  ≥ 0.912   
Noise Figure  Typical 4 dB  @ Maximum Gain 
VSWR  ≤ 1.5:1   
Advanced RF Technologies, Inc. Proprietary Document  Page 30 of 31 










