Setup Guide

2607 Colorado Blvd. Los Angeles, CA 90041

TEL: (323) 254-8131 FAX: (323) 254-4928

www.adrftech.com

________________________________________________________________________

USB Driver Setup Guide

Note: Make sure you are not connected to the internet during the driver installation.

1. Connect one end of the USB cable to the M1P USB port and the other end to the PC

USB port.

2. Once both ends of the USB cable are connected, the following window will appear.

Choose Install the software automatically (Recommended) as shown below:

Next, place the installation CD-ROM (included in the box) into your CD drive and click

Next on the hardware wizard.

Advanced RF Technologies, Inc. Proprietary Document

PAGE 1
2607 Colorado Blvd. Los Angeles, CA 90041 TEL: (323) 254-8131 FAX: (323) 254-4928 www.adrftech.com ________________________________________________________________________ USB Driver Setup Guide Note: Make sure you are not connected to the internet during the driver installation. 1. Connect one end of the USB cable to the M1P USB port and the other end to the PC USB port. 2. Once both ends of the USB cable are connected, the following window will appear.
PAGE 2
607 Colorado Blvd. Los Angeles, CA 90041 TEL: (323) 254-8131 FAX: (323) 254-4928 www.adrftech.com ________________________________________________________________________ 3. The hardware wizard will search automatically and find the correct drivers from the CD-ROM. 4. When the following window appears: Click on Continue Anyway. Advanced RF Technologies, Inc.
PAGE 3
2607 Colorado Blvd. Los Angeles, CA 90041 TEL: (323) 254-8131 FAX: (323) 254-4928 www.adrftech.com ________________________________________________________________________ 5. After installation has been completed, the following window will appear: Click FINISH Advanced RF Technologies, Inc.