User's Manual
Table Of Contents
- Introduction of Epoch-M1P
- Overview
 - Warnings and Hazards
 - Epoch-M1P Parts List
 - Epoch-M1P Software Installation and Requirements
 - 1.4.1 Minimum PCS Requirements
 - 1.4.2 Epoch-M1P Software Installation
 - ** Refer to the Software Setup Guide
 - ** Refer to the USB Setup Guide
 - Pre-Installation using Epoch-M1P Software
 - Step by Step Instructions for Installation
 - User Manual V1.0 using Epoch-M1P Software
 - Menu Structure
 - Using the Epoch-M1P Software
 - Alarms
 - Default Control Settings
 - Maintenance Guide for Epoch-M1P
 - Periodic Inspection Checklist
 - Preventive Measures for Optimal Operation
 - Troubleshooting
 - Tx & Rx LEDs
 - Common Installation Problems
 - Warranty and Repair Policy
 - General Warranty
 - Limitations of Warranty
 
 
    Epoch-M1P RF Repeater 
User Manual V1.0 
dB step across the 60 MHz PCS spectrum 
* Epoch-M1P-XX  RF repeater with factory built fixed filters 
Table 2 – Epoch-MIP Models
* In certain markets, service providers may be operating in non-
contiguous bands, e.g. D+E, A+C5, A3+D+C5, etc. In these special 
markets, we are able to offer custom fixed filters to the service providers. 
1.2 Warnings and Hazards 
Operating the Epoch-M1P with antennas in very close proximity 
facing each other could lead to severe damage to the repeater. 
WARNING! DAMAGE TO REPEATER
Working with the repeater while in operation, may expose the 
technician to RF electromagnetic fields that exceed FCC rules for 
human exposure. Visit the FCC website at 
www.fcc.gov/oet/rfsafety 
to learn more about the effects of exposure to RF electromagnetic 
fields. 
WARNING! EXPOSURE TO RF 
Opening the Epoch-M1P could result in electric shock and may 
cause severe injury. 
WARNING! ELECTRIC SHOCK 
Advanced RF Technologies, Inc. Proprietary Document  Page 8 of 38 










