User Manual

Duo-i6525 RF Repeater
User Manual V1.2
Advanced RF Technologies, Inc. Proprietary Document Page 22 of 32
- Alarm: Will display five alarms with three different status conditions (Normal,
Soft Fail or Hard Fail).
- Message Board: Will show up to recent 20 log messages (Alarms &
Heartbeats).
- Modem: Will display the status of the mode (e.g. Disabled, Not Connected or
Connected)
- Installation: Will display repeater’s installation status (Not Installed or
Installed).
- Repeater Info: Will display repeater’s serial number, modem ESN and MDN.
- Repeater Location: Will display the address where the repeater is installed
- Technical Support: Will display ADRF’s Technical Support contact
information.
- Installer Contact Info: Will display the installer’s name, phone and e-mail
address.
Note: Once successfully logged in, the repeater model name and the site/cascade
ID will be displayed on the top of all the windows (except for the Main Window).
Parameters Range Step Size
DL/UL
Output Power
-10 ~ 28 dBm 0.1 dB
DL Input Power 5 ~ -95 dBm 0.1 dB
Gain 40 ~ 65 dB 0.5 dB
vi) If you click on Control tab, the following window will appear:
Table 2 – Default Parameter Ranges