User Manual

Duo-i6525 RF Repeater
User Manual V1.2
Advanced RF Technologies, Inc. Proprietary Document Page 24 of 32
vii) If you click on Install tab, the following window will appear:
- Band Selection: Simply click on the desired operating bandwidth.
- Modem: By default, auto-connection box is checked so that the modem will
connect automatically once sufficient donor signal is present.
- SNMP: Type in the assigned site/cascade ID and manager IP address.
Default Site ID and Manager IP address is ADRF and 100.10.10.100
respectively.
- Repeater: Click Install button to automatically setup the repeater.
- Repeater Location: Will display the physical address where the repeater is
installed
- Repeater Installer Info: Will display the installer’s name, phone and e-mail
Address for technical support.
viii) If you click on System tab, the following window will appear: