User's Manual

x Transfer the combined downlink signals to OPT
x Receive the uplink signal from OPT
2SW LF8QLW$';+237
)LJXUH$';+237)URQW5HDU9LHZ
x Functions & Features
- Converts RF to optic signal and transports signals up to a maximum of 10Km (optical 5dBo loss
including optical connection loss).
- Supports up to (8) Master RUs
- Minimizes the number of optic fiber cable neeed by transporting multi band signals over a single
strand of fiber using WDM technology.
x Spec
- Size: 19.0 x 12.9 x 1.7 inches (482 x 327 x 44 mm)
- Weight: 13.2 lbs (6.0 kg)
/ ('V
The ADX-H-OPT has the following LEDs on the front panel as shown in Figure 3-12.
)LJXUH237/('
7DEOH 237/('6SHFLILFDWLRQV
$';'$60RGXOH 6SHFLILFDWLRQV
Solid Green Module power is ON Power
OFF Module power is OFF
OFF ODU is not installed
Solid Yellow LD Fail alarm exists in the ODU
LD FAIL 1-4/
LD FAIL 5-8
Solid Green No LD Fail alarm is present in the ODU
Solid Yellow PD Fail alarm exists LINK1 to
LINK8
Solid Green No PD Fail alarm is present
5 )SRUWV

)LJXUH2375)3RUWV
 '/,18/287
The combined downlink signal received from ADX-H-CHC is transferred to the DL IN 1(or 2) at the
back of OPT.
UL OUT is connected to one port among UL 1 to UL 8 ports at the back panel of ADX-H-CHC.