User's Manual
Table Of Contents
- 1. Introduction
- 2. Overview
- 3. Alarms
- 4. Installation
- 5. AXM2100-9543-ICS Web-GUI Setup
- 6. Maintenance Guide for AXM2100-9543-ICS Repeater
- 7. Warranty and Repair Policy
- 8. Specifications
- 9. mechanical drawing
- 10. Appendix
4. INSTALLATION
4.1 Installation Procedures
4.1.1 Wall Mount Procedure
• Verify that the AXM2100-9543-ICS and mounting hole are in good condition
• Place the AXM2100-9543-ICS mounting template up against the wall and mark of mount holes
• Mount the AXM2100-9543-ICS to wall use the six (6) mounting hole on the wall mount bracket
• Connect the GND cable
• Connect the Antenna cable
• Connect the Power cable
Figure 4-1 AXM2100-9543-ICS Wall Mount
4.2 Grounding
Install the ground cable that is included in the package at the back of the repeater as show in the figure below.
Figure 4-2 Ground Cable Connection
• Round ground terminals are located on the side of the repeater.
Mount bracket
Advanced RF Technologies, Inc. 22