User's Manual
Table Of Contents
- 1. Introduction
- 2. Overview
- 3. Alarms
- 4. Installation
- 5. AXM2100-9543-ICS Web-GUI Setup
- 6. Maintenance Guide for AXM2100-9543-ICS Repeater
- 7. Warranty and Repair Policy
- 8. Specifications
- 9. mechanical drawing
- 10. Appendix
5.2 Status Tab
Figure 5-2 Status Tab
5.2.1 Band
Figure 5-3 Band Display
5.2.2 Power & Gain
This section displays the Input, Gain, and Output for both downlink and uplink.
Figure 5-4 Power & Gain Display
• Input [dBm] – Displays the in-band Downlink/Uplink signal level. The system will display “--.-“when the input
level is < -90 dBm.
Advanced RF Technologies, Inc. 27