User's Manual
Table Of Contents
- 1. Introduction
- 2. Overview
- 3. Alarms
- 4. Installation
- 5. AXM2100-9543-ICS Web-GUI Setup
- 6. Maintenance Guide for AXM2100-9543-ICS Repeater
- 7. Warranty and Repair Policy
- 8. Specifications
- 9. mechanical drawing
- 10. Appendix
5.2.5 Install and Power Status
Figure 5-7 Install and Power Status
• Installation: Displays whether or not the installation routine has been run (Not Installed or Installed)
• Power: Displays the power source that is currently being used
5.2.6 Repeater Info / Repeater Location / Technical Support / Installer Contact Info
Figure 5-8 Repeater Info / Repeater Location / Technical Support / Installer Contact Info
• Repeater Info: Displays the serial number, latitude, longitude, firmware version, Web-GUI version
• Repeater Location: Displays the address where the repeater is installed
• Technical Support: Displays ADRF’s Technical Support contact information
• Installer Contact Info: Displays the installer’s name, phone and e-mail address
Note: Once successfully logged in, the repeater model name and the site/cascade ID will be
displayed on the top of all the windows (except for the Main Window).
Advanced RF Technologies, Inc. 29