User's Manual

Figure 5-36 Help
5.7 Logout
Clicking the Logout button will log the current user off the system.
6. MAINTENANCE GUIDE FOR AXM2100-9543-ICS REPEATER
6.1 Periodic Inspection Checklist
• Check for loose connections between the repeater and antennas. If connections are loose, make sure that all
connections are tightly fastened properly.
• Cables and connectors are in good condition.
• Ensure that the repeater brackets are in good. condition and that the repeater is securely fastened
6.2 Preventive Measures for Optimal Operation
6.2.1 Recommendations
• Perform the Periodic Inspection Checklist quarterly or semi-annually.
6.2.2 Precautions
• Do not operate the repeater with the antennas in extremely close proximity to one another as this may cause
damage to the repeater.
• Do not change the parameters unless instructed to do so by an authorized supervisor.
• Do not move the repeater unless instructed to do so by an authorized supervisor.
• Do not detach any cables to the repeater unless repair of respective components is necessary.
7. WARRANTY AND REPAIR POLICY
7.1 General Warranty
The AXM2100-9543-ICS carries a Standard Warranty period of two (2) years unless indicated otherwise on the
package or in the acknowledgment of the purchase order.
7.2 Limitations of Warranty
Your exclusive remedy for any defective product is limited to the repair or replacement of the defective
product. Advanced RF Technologies, Inc. may elect which remedy or combination of remedies to provide in its sole
discretion. Advanced RF Technologies, Inc. shall have a reasonable time after determining that a defective product
exists to repair or replace the problem unit. Advanced RF Technologies, Inc. warranty applies to repaired or
replaced products for the balance of the applicable period of the original warranty or ninety days from the date of
shipment of a repaired or replaced product, whichever is longer.
Advanced RF Technologies, Inc. 40