User's Manual

AXM700 Repeater
User Manual V0.2
Page | 12
3.3 Switches and Ports
3.3.1 Power Switch
The AC Power on/off switch is located at the back panel of repeater. The switch should be powered on after the repeater has
been physically installed properly.
Figure 1: AXM700 Repeater Power Switch View
3.3.2 Battery Port
The Battery Port is to be used in conjunction with the ADRF-BBU (Optional Battery Backup Unit). The ADRF-BBU offers up
to 8 hours of battery backup power to avoid any possible downtime due to power failure. If a backup battery is utilized,
please connect the battery to the unit via the external battery port as shown in Figure 4.
Figure 2: Battery Port
Note: Please contact ADRF Technical Support for assistance if you are unfamiliar with the installation procedure of our
battery box.