User Manual

Epoch-HP RF Repeater
User Manual V1.1
Advanced RF Technologies, Inc. Proprietary Document Page 22 of 36
3.1.3.2 Alarm Setting Window
Control Item Action Downlink Uplink
Downlink/Uplink
RSSI Sets Low RSSI Alarm Level -120 ~ -30 dBm -120 ~ -30 dBm
Downlink/Uplink
Input Overload
Sets Input Overload Level -90 ~ -20 dBm -90 ~ -20 dBm
RSSI
The RSSI alarm is the minimum RSSI value that the Epoch-HP requires to ensure
optimal coverage. The RSSI alarm will go off when the RSSI is lower than the
threshold value (refer to the RSSI value in the Alarm Setting Window).
Input Overload
A
Downlink/Uplink Input Overload alarm occurs when the input signal strength
to the Epoch-HP exceeds the threshold value (refer to the
Uplink/Downlink Input
Overload
values in the Alarm Setting window).
Figure 10 - Alarm Setting Window of the Epoch-H V1.X
Table 4 - Alarm Threshold Values