User Manual

Epoch-S02-19002W RF Repeater
User Manual V1.3
Advanced RF Technologies, Inc. Proprietary Document Page 14 of 33
11. Go to the Install Window
Now with the blinking TX and RX status LEDs on the Status Window, go to
the Install Window. You will see the following:
12. Select the Desired Band or Bands
Select the desired band or bands by clicking the appropriate buttons.
You can deselect the undesired band or bands by clicking the button
again. You can select among 15 band combinations; A, B, C, D, E, F, AD,
AE, AF, BD, BE, BF, CD, CE or EF. Neither two 5 MHz bands (e.g. DE, DF,
etc.) nor two 15 MHz bands (e.g. AB, AC, etc.) are allowed. The default
band is A.
Control Item Action Setting Value
15 MHz Band Band Selection A/B/C
5 MHz Band Band Selection D/E/F
** Only one 15 MHz band and one 5 MHz band can be chosen
simultaneously (i.e. A and D, B and E, etc.; not A and B, E and F, etc.).
** If a wireless modem is not connected, skip steps 13 through 15 and
proceed to step 16.
Figure 4 - Installation Window of the Epoch-S02 OMS V4.XX
Table 1 - 15 MHz and 5 MHz Band Options