User Manual

Epoch-S02-19002W RF Repeater
User Manual V1.3
Advanced RF Technologies, Inc. Proprietary Document Page 22 of 33
Band
Select the desired band or bands by clicking the appropriate buttons.
You can deselect the undesired band or bands by clicking the button
again. You can select among a total of 15 band combinations; A, B, C, D,
E, F, AD, AE, AF, BD, BE, BF, CD, CE and EF. Neither two 5 MHz bands nor
two 15 MHz bands can be selected at any given time.
** If a wireless modem is not connected to the repeater, simply select the
desired operating band(s) and click on “Install.”
SNMP (only applicable if a wireless modem is connected to the repeater)
a
. Site ID
The Site ID is a unique ID for each site and will be provided by the
Wireless Provider.
b. Manager IP
The
Manager IP address will be provided by the Wireless Provider. The
repeater will send alarms to the Wireless Provider’s NOC to the assigned
Manager IP address.
Modem (only applicable if a wireless modem is connected to the repeater)
The
Auto Connection box needs to be checked when the wireless modem
is installed inside the repeater. A wireless modem is used in order to
send the alarms and the heartbeat over the air to the Wireless Provider’s
NOC.
Repeater
Click the “Install” button and the repeater will setup automatically.
For information regarding the use of the Epoch-S02W OMS V4.XX during
installation, refer to Section 1.7.1 on page 12, “Repeater Installation” (starting at
number 9).