User Manual

Epoch-S02-8002W RF Repeater
User Manual V1.0
Advanced RF Technologies, Inc. Proprietary Document Page 15 of 33
If a modem is not connected to the repeater and you click the “Install”
button, the following pop-up window will appear:
If you choose to continue with the RF portion only, simply click “Yes” and
the installation process will resume again.
16. Check the Front LED Panel
Check that the Power LED is on (Green) and neither Soft Fail LED (Yellow)
nor Hard Fail LED (Red) is lit.
** If the Soft Fail or Hard Fail LED is on, refer to Section 2.3 on page 23.
** You can go to the Status Window of the OMS V1.XX program to view
the basic parameters of the repeater once the repeater has installed
successfully.
17. Lock the Epoch-S02-8002W Door
Now you can lock the door using the key provided.
CONGRATULATIONS!!
The Epoch-S02-8002W Installation Process is Complete.